How To Make Enamel Pins

how-to-make-enamel-pins

Okay, so you’ve got an awesome idea for a pin that you want to make.

Now what?

Most people assume that making your own enamel pins is a long and complicated process. It’s not. It’s actually pretty simple and straightforward, and in most cases, it doesn’t take longer than 2-4 weeks.

So, how do you make your own enamel pins?

The process of making your own pins can be broken down into these six steps.

Prepare Your Artwork File

In order to start production, the minimum requirement a pin factory will ask for is a PDF file of the design you’d like to get produced.

You can either draw and color a sketch of your idea on a white piece of paper and scan it as a PDF file or, if you know your way around one of the many graphic design software options out there, you can send them a digital file of the art you’d like to get made into a pin.

A few design-related tips I’d recommend for anyone starting off would be:

Simplify

Clocking in at around 1-2 inches in size, pins are a small canvas to work on so the fewer lines and details you can use to convey an image, the more likely it is that it’ll translate to a clean and clear pin design.

Use Bold Lines And Strong Colors

Pins are small so thin lines and muted colors tend to not stand out when looking at a pin from a distance. Use bold lines and strong colors instead!

Avoid Shading

Colors within a pin are exclusively delimited by the lines, this means that any type of shading within a color is not possible. Save yourself and the factory some time by not including shading in your pin design.

Here is an example of a pin design well suited for pin production and one that's not:

how-to-make-enamel-pins-pin-design-mockup

The design on the right has complex thin lines and shading. It will not translate well into a pin. The one on the left is the same design but simplified using strong bold lines that delimit all colors.

Alright, now that you have your design artwork ready, it’s time to

Decide What Material Your Enamel Pin Will Be

Although pins can be made from a wide variety of materials, there are two traditional formats most pin-makers stick to. Hard Enamel and Soft Enamel pins. What’s the difference?

Hard Enamel Pins

Their defining characteristic is the thin metal lines separating each color and a smooth, hard enamel finish.

They are made from die-struck iron metal and produced by heating to a high temperature and then polishing to create creating a smooth surface, which usually gives them a high-quality, durable feel.

Here's an example of what a hard enamel pin looks:

How-to-make-enamel-pins-hard-enamel-pin-material

Soft Enamel Pins 

The defining characteristic is their textured pin surface with allowance to more detail and slightly lower cost.

They are made from die-struck iron metal, electroplated, and optional epoxy coating, which usually gives them a thinner feel in comparison to Hard Enamel pins.

How-To-Make-Enamel-Pins-Soft-Enamel-Pin-Material

They are both tried and true materials so whichever one you choose can make for a great pin. Go with whatever style can best communicate your design!

Decide What Size You Want Your Enamel Pin To Be

Now that you have your artwork and pin material ready, how do you pick the size of your pins?

Smaller pins are usually between .75-1.25 inches wide or long. This makes them more portable, easier to fit onto any surface and usually lower in cost given that they use less material.

The downside to smaller pins is that they usually don’t allow for much detail when it comes to the design.

How-to-make-enamel-pins-small-pin-size-mockup

Larger pins, which are larger 1.25 inches wide or long, allow for much more detailed design since you’re working with a larger canvas, but their size also limits the places where they can be pinned too.

You’re likely not going to see many people wear a 2-inch pin on their lapel.

how-to-make-enamel-pins-large-pins-mockup

If you’re working with a limited budget and have a simple design, smaller pins are likely your best bet.

Pin price is usually determined by pin size, so they are likely to be cheaper. If you want to create a very detailed pin and don’t mind paying a higher price, then larger pins are the right option for you.

Decide How Many Enamel Pins You Want To Produce

After your artwork, material and pin size are decided upon. It’s time to choose how many pins you want to produce, and this one is pretty easy.

All factories have a minimum of 100 units for your first order. I’d always recommend sticking to the minimum of 100 pins and then re-ordering more if it does well.

Most of the time, it’s very hard to predict how well your pin will be received and it’s always best to play it safe than order large quantities of a pin no one is buying.

how-to-make-enamel-pins-minimum-quantity-custom-pins

Decide How Many Pin-Backs You Want Your Enamel Pin To Have

A pin-back is the needle-like mechanism, usually in the rear section of a pin, that is used to temporarily fasten it to a surface.

And when it comes to pin-backs, there’s only one thing you need to know:

Always put two pin-backs on all of your pins!

Why? Using only one pin-back will allow your pin to jiggle around wherever you place it and it’ll be a lot more likely to fall off and get lost.

There’s nothing worse than losing a loved pin due to faulty pin-back planning.

Don’t make the mistake I, and countless of other first-time pin makers have made...always put two pin-backs on your pins.

how-to-make-enamel-pins-pin-backs-mockup

Find a Factory To Produce Your Enamel Pins

Last but not least, it’s time to find the right factory to produce your pins.

A quick Google or Alibaba search for “enamel pin factory” will bring up dozens of suitable producers.

To decide who to work with, email them a low-res jpg of your artwork (not the final PDF, which will help avoid them “borrowing” your design), the material you’d like, the size, the quantity, the number of pinbacks you’d like and ask them the following questions:

- What will it cost me to produce 100 units of this enamel pin?

- What's your turnaround time once the artwork is approved?

- Can you send me a photo of the produced pin before you ship it out?

- Do you accept payment 50% upfront and 50% once the photo of the produced pin is approved?

Note: these are favorable payment terms for you because they allow you to view the enamel pin before it's shipped out and ask for revisions if the factory produced the pin differently than the artwork you approved. 

This is what your email should look like:

how-to-make-enamel-pins-factory-enamel-example

The factory that gives you the best terms for these 4 questions is the one you should go with.

In most cases, the production and communication process will go something like this:

→ You send them your artwork with all of your requirements for production.

← They give you a cost estimate and final production artwork for your approval.

→ Once artwork and costs are approved by you, you pay them 50% of the total costs to start production.

← They produce the pin for you in the turnaround time they committed to.

← Once the pins are produced, they’ll send you a photo of the final product for your approval.

→ If you’re happy with the quality of the final product in the photo, you approve it for shipment and you pay them the final 50% of the total costs.

← They’ll give you a tracking number for your shipment and you’ll receive your pin.

My list of recommended factories:

There are A LOT of enamel pin factories out there and finding the right one usually requires a lot of trial and error. In my case, I’ve worked with a bunch of them through my years as a pin makers and the ones that I’ve personally have had the best experience with in terms of pricing, customer service, communication, and reliability are the following:

(These factory recommendations and current and all updated for 2023)

Erich Gift:

Location: China :cn:
Pricing: $175 - $200 for 100 enamel pins :+1::skin-tone-3:
Turnaround: 10 days rushed and 2-3 weeks for non-rushed orders :package:
Payment terms: accepts 50% deposit pre-production & 50% after photo proof
About the manufacturer: Made up of 20 Artists, 10 Logistics employees, 10 QC, 400 skilled workers. 
We would definitely recommend working with them if you're looking for lowest prices and a high quality production! Read More

Yourstuffmade.com:

Location: USA, AU, UK, CN, PH :earth_africa:
Pricing: $175 - $290 for 100 enamel pins :+1::skin-tone-3:
Ethically Certified: Yes :white_check_mark:
Turnaround: approximately 2-3 weeks, delivered globally :package:
Payment terms: accepts 50% deposit pre-production & 50% after photo proof

About the manufacturer: A very high quality artist-owned ethical manufacturer with 24 hour customer service and focus on sustainability. Your Stuff Made offers a wide range of custom products including metal accessories, apparel, gift packages, pet products, and more. If you need to create a lot more products dealing with this factory makes a lot of sense to save costs and talk to the same person Read More

GS-JJ.com:

Location: China :cn:
Pricing: $185-$250 for 100 enamel pins :+1::skin-tone-3:
Turnaround: 10 days rushed and 2-3 weeks for non-rushed orders :package:
Payment terms: accepts 50% deposit pre-production & 50% after photo proof
About the manufacturer: GS-JJ has over 20 years of experience in producing pins. GS-JJ also creates customized and promotional gifts such as ribbons, coins, stickers, and lanyards. They generally have faster turnarounds and customer service which makes them a strong manufacturer Read More

Sabrina at Jiayue Pins:

Location: China :cn:
Pricing: $180-$290 for 100 enamel pins :+1::skin-tone-3:
Turnaround: 10 days rushed and 2-3 weeks for non-rushed orders :package:
Payment terms: accepts 50% deposit pre-production & 50% after photo proof
Custom products: enamel pins, medals, coins, dog tags, keychains, lanyards, bottle openers, patches :gift:

About the Manufacturer: Nothing but great things to say about working with Sabrina at Jiayue Pins. A factory that has been manufacturing high-quality custom enamel pins, medals, coins, keychains and other metal product for more than 10 years. Great service and able to help with production requirements. Read More

❤️ View all of PINLORD's BEST manufacturers

If you're interested in getting quotes from these companies, email them with the word "PINLORD" in your email title and they'll give you the friends custom service :)

My recommendation to you is to email all of them and go with the one that you feel is best suited for you. 

Please note that of course there are many other options out there, but these are the factories I’ve personally worked with consistently and feel comfortable advocating for them to other pin makers who are looking for the best enamel factories out there (I’ve also worked with a bunch of other factories that produced 

Oh, and one last tip before you begin...BE NICE with your factory contact! See the pin creation process as a partnership with your factory! Be empathetic, ask for their feedback and help in terms of the best production processes and treat them as you’d like to be treated. They can be your biggest ally when it comes to getting a final product you’re proud of!

Now, you have all the information you need to make your own custom enamel pins. Get out there, create and share your pins with the world!

sharing is caring enamel pins

Thanks so much for reading this article. If you found it helpful, please share it with your friends! It'll help more people see it. 

Also, if you're interested in building a better enamel pin business, you can check out these articles as well :)

How to make enamel pins. 

- The best enamel pin factories. 

- How to sell enamel pins. 

How to package and ship your pin sales. 

- How to design and mock up enamel pins. 

- Copyright infringement and enamel pins. 

That should give you a good place to start, but if you need more help, always feel free to DM me on Instagram @pinlord. I'm testing out new pin factories all the time and I'm happy to share them :)

Back to blog

3 comments

Best Guide yet! thank you :)

Liam

This guide is really helpful, thanks so much for sharing! :))

Roro

Thanks for providing such a great information about Enamel Pins

David Jacob

Leave a comment

Please note, comments need to be approved before they are published.